Wednesday, 11 May 2016

More research

 More research


http://www.jobmonkey.com/uniquejobs/key-grip/ 
http://www.media-match.com/usa/media/jobtypes/grip-jobs-402724.php

While I do wish to become a grip, there's one side of grip work that I still need to look into in my personal time and that is the creation of scaffold and pieces of grip equipment as well as how to maintain them. while I am quite capable of using all the grip equipment on hand at uni, baring the Steady cam which I believe is in fact broken likely due to someone over tighten screws as even after perfectly adjusting the damned thing it slides out of alignment in no time making it useless on set. The track and dolly used here at uni is a prime example of why I need to acquire these skills.when the sleepers broke or went missing they saw fit to replace the sleepers with what looks like a re-cycled sign with the old sleepers bolts stuck in.

Other skills I wish to acquire as a grip include being able to fly a drone. Although this is a long term goal
http://uav-air.com/?gclid=CjwKEAjwsMu5BRD7t57R1P2HwBgSJABrtj-Rgyy5gLBVfm2jqtDiSwVVrqqlwd9oZRvWxETjwjioxBoCTevw_wcB

http://shop.droneflight.co.uk/pages/become-a-uav-pilot

Becoming a drone pilot would require me to take courses at a drone flight school in my own time.
And as an example of a flight school in the UK
 https://phantomflightschool.co.uk/flight-school/?gclid=CjwKEAjwsMu5BRD7t57R1P2HwBgSJABrtj-RneEfKdPXZ9M1YDpGzW7gbTYs6m-p89mSWQdGLzotERoCdWrw_wcB 

As the grip/gaffer on set I was in charge of Lights, cables and any grip equipment. As well as making sure that these object were safe and remained safe to anyone both on and near the set. a duty I succeeded in unless anyone decides to develop sudden injuries. But mostly when on set as far as grip work went I was in charge of setting up the track and dolly as well as the jib and making sure the correct safety measures were in place, although I did confuse the cameraman on one shoot when I gave the track a few swift kicks to iron out some small kinks in the track.

For the sake of showing that I do know what I'm taking about when using the Uni's Jib for example you Need one person holding the jib at any time the camera is attached, should you wish to move the camera and Jib, you can get away with one person doing both, but for any precision work you want two people Ideally, 3 if your pull focusing. The Track and Dolly is at all times a minimum of a 2 man operation. The Grip holding on to the dolly and the cameraman on the track. When the cameraman is on the Dolly the grip can not let go and must have marked off the end of the track so as to ensure the dolly does not slip off the end. Further more the Tripod for the Camera must be hooked down with jockey straps to hold it in place during the shot.


No comments:

Post a Comment